Ce document n'est actuellement disponible qu'en anglais.
Properties and characteristics
The following table gives general tendencies and experience values. Because of the complexity of the involved processes deviation may occur in the concrete application case.
- SL: sintered sleeve bearings
- KL: ball bearings
criteria, characteristics |
sintered sleeve bearings (SL)
|
ball bearings (KL)
|
|---|---|---|
| continuous operation | suited for higher speeds (>ca. 500 min-1) | suited for all speeds |
| start-stop operation | reduced life expectancy |
suited |
| reversed operation | not suited | suited |
| atmosphere (humidity, inert gases, vacuum) | not suited for vacuum |
not problematic, if necessary special lubrication |
| high ambient temperature | up to 85°C not problematic | |
| low ambient temperature | less suited (if necessary special lubrication) | |
| noise | quieter | louder |
| price | lower | higher |
Application fields
Sintered sleeve bearings
- in smaller motors
- for continuous operation at higher speeds
- in spur gearheads
Ball bearings
- in bigger motors
- for continuous operation at high and low speeds
- for start-stop-operation, reversed operation
- in planetary gearheads
Commentaires
0 commentaire
Cet article n'accepte pas de commentaires.